If you’ve used your Breeo fire pit to enjoy some cozy fires or make some barbecue, you’re probably left with a fair amount of ashes in the bottom. What do you do when it’s time to clean out the ashes?
To get the ashes out of your Breeo fire pit, use a fire pit shovel and broom to scoop out the ashes, pour water down the inside of the fire pit, and then use a cleaning tool to scrape up any remaining dirt and debris.
Breeo fire pits are built to last, but they still need a little bit of care now and then. In this article, I’ll give tips on cleaning your Breeo fire pit so it will continue to provide you with years of enjoyment.
1. Prepare Your Fire Pit for Cleaning
If you’re looking to clean out your Breeo, the first step is to ensure that it’s cooled down and no hot embers remain. You don’t want to clean a hot fire pit, as this could be dangerous.
To do this, let the unit cool down for at least 24 hours after use. Once it’s cooled, you can safely dispose of the ashes. You may use a Smedley & York Black Ash Bucket with Lid on Amazon.com to scoop out ashes and embers for its capacity and quality .
2. Use Water To Rinse the Pit
You can use water to clean your fire pit after each use to prevent the build-up of soot and dirt.
Here are some cleaning tips:
- Use a garden hose to rinse the ashes and debris off the Breeo pit. You may also use a bucket of water to pour into the pit.
- Keep pouring water until it covers all the ashes and debris. If you’re using a garden hose, you may need to allow the water to run for several minutes while occasionally stirring to help loosen any remaining particles.
- Use a gentle stream of water and avoid too much pressure.
Read More: Why is my Breeo smoking?
3. Scrape Out Dirt and Debris
If your fire pit is full of stubborn ashes, don’t worry–there are a few steps to get them out.
Here’s how you can scrape off ashes in your fire pit:
- Use a scoop or spade to loosen the ashes from the bottom of the fire pit.
- Scrape off any built-up ashes or debris starting from the sides and then to the bottom.
- Once the ashes are loosened, use a fire pit broom and dustpan to get them out of the fire pit.
Be sure to get rid of any big chunks of ash. Go slowly and cautiously, so you don’t damage the surface of the fire pit.
4. Use a Scrubbing Brush
You can use a scrubbing brush to clean the bottom and sides of the fire pit thoroughly. Doing so will help you get rid of any remaining dirt and grime on the inside of the fire pit.
When it comes to scrubbing dirty surfaces, there are a couple of things you can do to make the process easier:
- Make sure you have the right cleaning tools. The Quickie Union Heavy-Duty Scrub (available on Amazon.com) will go a long way because of its sturdiness and quality. Be sure to use a cleaning brush with stiff bristles so you can really get in there and scrub away the grime. If your fire pit is particularly dirty, you may need to use some elbow grease to clean it.
- Use hot water when possible. Hot water will help loosen any dirt and grime that may be stuck to the surface. Finally, rinse the area well after scrubbing to remove any soap residue. You can pour more water over everything and scrub one more time using a stiff-bristled brush before rinsing clean with fresh water.
5. Consider Using an Acid Cleaner
Another way to clean your fire pit is by using an acid cleaner. An acid cleaner will help to break down the ashes, corrosions, and stains and make them easier to remove. You can find acid cleaners at your local hardware store or online. Remember to follow the directions and special instructions on the bottle carefully.
If you have a metal fire pit, you can also use a vinegar solution to help clean it. Vinegar is a natural, non-toxic cleaning agent that can safely and effectively remove dirt, soot, and grime.
Here’s how to use it:
- Mix equal parts water and vinegar in a bucket.
- Next, use a stiff cleaning brush to scrub the fire pit in circular motions.
- Allow the mixture to sit on the fire pit for a few minutes before rinsing it with water.
By cleaning your fire pit with an acid cleaner, you can maintain its natural texture and finish. Just be sure to sweep out the ashes regularly, and you’ll be able to enjoy your fire pit for many years to come.
You might also be interested in: The Breeo vs the Solo Stove!
6. Remove Moisture by Using a Cloth or Paper Towel
After cleaning your fire pit, it’s essential to dry the area using a cloth or paper towel. Doing so will help prevent any rusting that could occur. Rusting is a common problem with some fire pits, so taking this extra step will help keep your fire pit in excellent condition for years.
Here are additional tips to prevent rusting in your fire pit:
- Make sure to get the ashes out of your fire pit regularly. Doing so will remove any dirt or debris that could potentially cause rusting.
- If you live in a humid area, consider storing your fire pit indoors when not in use. Humidity and exposure to moisture are the common causes of rusting.
- Make sure your fire pit is covered when not in use. Doing so will help keep it dry and protected from the elements.
- If you notice rust forming on your fire pit, sand it down and apply a rust-resistant coating. Coating for metal surfaces will provide an extra layer of protection against rust.
Rinsing, scraping, and brushing will help keep your Breeo fire pit clean and in excellent condition. Once you’ve gotten rid of all the built-up ash, you’ll be able to enjoy your fire pit for many seasons.